AFTER-MARKET
‘Heater Hose Assembly Tee
Kit’
Replacement for
a
2008-2019 Dodge Journey
2.4VVT
Part Number:
05058437AK
I am the original inventor. The only
AUTHORIZED EBAY SELLERS of this assembly are AutoPartsHere and FlybyJet. My
assembly is made in the USA using quality USA parts and shipped through USPS Priority
Mail, which is much faster than First Class.
NOTE: This part will fit
a Dodge Journey 2.4 liter engine only.
PLEASE BE SURE TO READ THE ENTIRE LISTING BEFORE
PURCHASE!
IMPORTANT: The line drawing above shows the ‘original
factory parts’ (highlighted in yellow) that become defective due to heat, mainly
because the tee fitting is
made of plastic
, is very thin-walled and is
under a tremendous amount heat from the catalytic converter underneath and it
cracks.
Our hose assembly kit is a long-term solution to the problem
because it uses a brass tee instead of plastic. Why buy from the middleman
dealer that wants to sell you another full assembly with the same plastic tees
that will leave you stranded again? I WAS that person stranded on the road just
like you! 200,000 miles later, I have had no issues after installing my own
engineered assembly kits.
NOTE: The listing price is for ONE of our
aftermarket hose assembly kits which can be used to replace either the upper or
lower lines coming from the front heater core to the plastic thermostat manifold
on the engine, and to the aluminum tubes on the fire wall that goes to the back
of the vehicle to the rear heater core.
You can purchase just one of our
kits if you are on a budget and need to get back on the road quickly or purchase
two kits to replace both the upper and lower assemblies at the same time for
full peace of mind.
Repairing your Journey is easy to do. You
already paid for the aluminum tubing that is attached to the firewall when you
bought the vehicle, so why buy their pre-molded assembly that forces you to
re-buy the tubing, too?
You won’t need to crawl under your
vehicle in an effort to remove and re-attach more tubing, because our ‘heater
hose assembly’ attaches to the existing tubing from the firewall. Make the
entire repair right under the hood. Our assembly saves you time, money and
unnecessary work.
My Hose Kit also keeps the Tee connection
point 6 inches up higher, away from the exhaust manifold and catalytic
converter, keeping it cooler from the intense HEAT!
I would have just sold a Tee
if that would have worked, but the original ‘factory molded’ hose was heated,
vulcanized and stretched out of its ‘standard size’ where the 3 hoses connect to
the Tee. To replace just the Tee you would have to cut back all the hoses to fit
the new Tee properly, but then the hoses would all be too short. The high-temp
hosing I supply in my Kit will fit snugly onto all points on the manifold,
heater-core and the aluminum tube going to the rear
heater.
No doubt at all! If your upper or lower heater
hose cracked, this kit will fix it!
I also have a Dodge Journey. I was very angry
when the OEM Tee (a thin-walled piece of plastic engineered by them to fail AND
just out of warranty) happened to crack on the interstate quickly overheating my
car as every drop of coolant pumped out in 60 seconds. Stranded on the highway
on a hot day, I refused to give Dodge $130+ for another sub-standard plastic
part. They designed it with a plastic tee so we would have to keep replacing the
entire assembly. As an auto a/c and hvac mechanic I redesigned their junk and
fixed the problem for the long term.
People have told me that Dodge and other auto shops have
charged them upwards of $600 to fix this.
If you can use a
screwdriver and have 15 minutes you can do a full and proper long-term repair on
one or both assemblies. Tools needed are a sharp knife and regular screw driver.
New Ideal Tridon Hy-Gear Stainless Steel clamps included.
These
hose assembly kits are assembled in my Auto Air Conditioning shop in SW Florida,
USA.
The Dodge Journey FWD, 2.4L 4 Cyl DOHC 16V Dual VVT, can’t take
overheating. These hose assemblies fit many models and are made extra long, so
for best fit you can trim off some of the extra hose.
After installing your new hose assembly fill
with antifreeze. Wait for thermostat to open after reaching operating
temperature and top off cooling system.
We include detailed ‘installation
instructions’ on the packing slip in English and Spanish, plus
I include
my phone number if you need some help with the installation.
I am happy to
help.
If you cannot install the assembly on your vehicle
properly, please consult a certified mechanic.
These kits are intellectual property,
patent pending. This listing (text/images) may not be duplicated or transferred.
It is the property of AutoPartsHere on Ebay.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thank you for
viewing my listing.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PLEASE READ AND AGREE TO ALL THE
INFORMATION
BELOW BEFORE BUYING. THANK YOU.
(The Terms/Conditions below supersede
eBay’s prefilled information.)
Terms and
Conditions
Please double-check your Ebay shipping address and update it
if necessary, prior to purchase.
Please ask any questions prior to
purchase.
Make sure you have read and understand the entire listing
description and photos before purchase.
Shipping
Items are always securely packaged. We ship the same day or within one
(1) business day, but please allow up to two (2) business days. Package sent by
USPS Priority mail.
Shipping Cost
Please click on the
Shipping Tab above.
Returns
We accept returns for domestic
buyers only. No international returns. Buyer pays for return shipping. Item must
be in the same condition as originally sent. Our assembly IS exactly as
described and it WILL work without issues if properly installed on designated
Dodge Journeys. No return allowed if item was installed, damaged, missing parts
or used on vehicle.
If you have any further questions, please message me through eBay.
Thank you.
Fits
Dodge Journeys 2.4 liter
– 2008, 2009, 2010, 2011, 2012, 2013, 2014,
2015, 2016, 2017, 2018, 2019, 2020
2009-2019 Dodge Journey Heater Hose,TEE Supply- Return 2.4 VVT 5058437AK EBAY
$21.08
479
Description